Photos for illustration only
Panelvit FP TX CHROMITING® hinge screw 7 x 100 box of 100 MUSPV057A701000C8C Mustad
MUSTAD Panelvit MUSPV057A701000C8C hinge screw, dimensions 7x100 mm. Equipped with a TX30 recess for optimal driving. Chromiting finish.
Internal SKU: MUSPV057A701000C8C
- Brand
- Mustad
- Reference
- MUSPV057A701000C8C
27,78 €33,34 € TTC
- Direct shipping from supplier
- Tracking number sent by email
Technical specifications Mustad MUSPV057A701000C8C
- empreinte
- tx30
FAQ Panelvit FP TX CHROMITING® hinge screw 7 x 100 box of 100 MUSPV057A701000C8C
- What type of tool is recommended for this screw?
- This reference uses a Torx 30 (TX30) recess. It is essential to use a perfectly matched TX30 screwdriver bit to ensure correct torque transfer and to prevent damage to the recess during installation.
- What are the installation precautions for a 7 mm diameter screw?
- To ensure the integrity of the substrate, particularly in dense wood, a pilot hole is recommended. Ensure you use a drill bit with a diameter slightly smaller than the nominal screw diameter to facilitate engagement while maintaining good holding power in the material.
- Does the Chromiting finish provide corrosion protection?
- The Chromiting finish is a surface coating applied by the manufacturer MUSTAD. This treatment improves corrosion resistance compared to a standard zinc-plated finish, making it suitable for environments where moderate protection against external agents is required.