MecaIndus
Flat webbing sling type 2 3 T/3 M

Photos for illustration only

Flat webbing sling type 2 3 T/3 M PMSP33 PMS

PMS PMSP33 flat webbing sling, type 2, lifting capacity 3 tonnes for a working length of 3 metres. Complies with standard technical requirements.

Internal SKU: PMSP33

Brand
PMS
Reference
PMSP33
21,16 €25,39 € TTC
  • Direct shipping from supplier
  • Tracking number sent by email

FAQ Flat webbing sling type 2 3 T/3 M PMSP33

What is the distinction between the nominal capacity and type 2?
Type 2 refers to the sling structure according to European standards for synthetic fibre slings. The 3 tonne capacity represents the working load limit (WLL) in straight lift, without any sling mode factor applied.
What checks are necessary before each use?
It is imperative to inspect the condition of the stitching and check for any cuts or abrasion on the woven bands. Any significant deformation or contact with incompatible chemical agents must lead to the immediate withdrawal of the sling from service.
How should the 3 metre length be interpreted for this sling?
The 3 metre length corresponds to the working length, measured between the two contact points of the sling. This dimension directly determines the calculation of slinging angles when handling bulky loads.