Photos for illustration only
Ribbed angle bracket clipped corner galvanised steel 30x100x81x1.5 TIEENPC100/1,5 Simpson
Simpson TIEENPC100/1.5 ribbed angle bracket in galvanised steel. Dimensions: 30x100x81 mm with a thickness of 1.5 mm. Ideal for structural fixings.
Internal SKU: TIEENPC100/1,5
- Brand
- Simpson
- Reference
- TIEENPC100/1,5
2,02 €2,42 € TTC
- Direct shipping from supplier
- Tracking number sent by email
Technical specifications Simpson TIEENPC100/1,5
- width (mm)
- 30
- length (mm)
- 81
- Thickness (mm)
- 1,5
FAQ Ribbed angle bracket clipped corner galvanised steel 30x100x81x1.5 TIEENPC100/1,5
- What is the benefit of the rib on this Simpson angle bracket?
- The ribbed design of the TIEENPC100/1.5 reference provides increased structural rigidity compared to a standard flat angle bracket. This geometry reinforces bending resistance when supporting loads in timber-to-timber or timber-to-concrete connections.
- Can this angle bracket be used in outdoor environments?
- Yes, this angle bracket is made of galvanised steel, providing protection against corrosion. It is therefore suitable for use outdoors or in damp environments, provided that the service classes defined by Eurocode 5 are observed.
- How do I select the fixings for this angle bracket?
- Installation must be carried out using fixings with a diameter compatible with the 30x100x81 mm component holes. It is essential to use annular ring shank nails or structural screws in accordance with the manufacturer's recommendations to guarantee the nominal load values.