Photos for illustration only
External flange joist hanger galvanised steel 100x172x84x2 mm TIESAE440/100/2 Simpson
SIMPSON TIESAE440/100/2 external flange joist hanger in galvanised steel. Dimensions 100x172x84 mm with a thickness of 2 mm for structural assemblies.
Internal SKU: TIESAE440/100/2
- Brand
- Simpson
- Reference
- TIESAE440/100/2
6,10 €7,32 € TTC
- Direct shipping from supplier
- Tracking number sent by email
Technical specifications Simpson TIESAE440/100/2
- length (mm)
- 84
- Thickness (mm)
- 2
FAQ External flange joist hanger galvanised steel 100x172x84x2 mm TIESAE440/100/2
- What standard governs the use of this galvanised steel connector?
- This connector is designed to meet the requirements of the NF EN 14545 standard relating to connectors for timber structures. The use of galvanised steel provides effective protection against corrosion in accordance with service classes 1 and 2 as defined by Eurocode 5.
- How should the 2 mm thickness be interpreted in the context of load calculations?
- The 2 mm thickness is a critical parameter for the static sizing of the fastening. It is imperative to refer to the manufacturer's load tables to validate that this thickness is sufficient to support the shear forces and bending moments induced by the section of the carried beam.
- What precautions should be observed during installation to ensure nominal load-bearing capacity?
- To ensure that calculated loads are supported, all pre-drilled holes on the flanges must be fitted with fasteners compliant with the manufacturer's specifications (such as ring-shank nails or structural screws). Full filling is essential, as partial fastening would drastically alter the stiffness and resistance capacity of the joist hanger.