Photos for illustration only
Internal flange joist hanger galvanised steel 100X200X76X2 mm TIESAI500/100/2 Simpson
SIMPSON TIESAI500/100/2 internal flange joist hanger in galvanised steel. Dimensions 100x200x76 mm, thickness 2 mm, designed for joist assembly.
Internal SKU: TIESAI500/100/2
- Brand
- Simpson
- Reference
- TIESAI500/100/2
7,36 €8,83 € TTC
- Direct shipping from supplier
- Tracking number sent by email
Technical specifications Simpson TIESAI500/100/2
- length (mm)
- 76
- Thickness (mm)
- 2
FAQ Internal flange joist hanger galvanised steel 100X200X76X2 mm TIESAI500/100/2
- What is the structural advantage of the internal flanges on this hanger?
- Internal flanges allow for direct side fixing to the supporting member while concealing the fasteners. This configuration facilitates installation in tight spaces or when a flush finish is required for joisting.
- What installation precautions should be observed for this galvanised steel assembly?
- Assembly must be carried out using fasteners compatible with the diameter of the pre-drilled holes on the flanges. The use of galvanised steel requires limiting exposure to highly corrosive environments and ensuring the assembly is protected from standing moisture to guarantee the connector's durability.
- How do I verify the compliance of this hanger for a structural application?
- The load-bearing capacity depends on the type of nailing or bolting used in the designated holes. It is essential to refer to Simpson's load tables to validate compliance with Eurocodes according to the timber type and applied loads.